The RIDGID 18 In. Aluminum Pipe Wrench fits Up To 2-1/2 In. Pipe. It is nearly 40% lighter than comparable cast-iron models of the same size. The jaws and all other parts are identical to RIDGID Heavy-Duty Wrenches.
The RIDGID Aluminum Wrench is 30 percent lighter than the RIDGID heavy-duty wrenches. The jaws & all other parts are identical to RIDGID heavy-duty.
Champion 3550W / 4450W Portable Generator with camouflage finish is powered by 224cc Champion single cylinder, 4-stroke manual start OHV engine with low-oil shutoff Power output: 3550W running / 4450W starting, providing 10 running hours at 50% load and a quiet (68 dBA) noise level Provides you with (1) 120-volt duplex, (1) 120-volt L5-30R twist-lock and (1) TT-30R RV-ready outlet on the panel.
No wheel kit included.
MotoMaster Jump Starter and Power Bank is a compact, yet powerful lithium jump starter that boosts dead batteries and provides portable USB power so you can charge and power your USB devices anywhere
Advanced lithium-ion battery delivers up to 1200 peak Amps - recommended for gas engines up to 7.0L and diesel engines up to 5.0L
Provides up to 20x jump starts on a single charge and holds charge in storage for more than 6 months
Override mode allows you to boost batteries as low as 0 Volts
16000 mAh battery capacity with dual USB output for powering and recharging smartphones (up to 5x), tablets (up to 3x), action cameras (up to 10x), wireless headphones (up to 24x) and virtually any other USB device, anywhere
12V power supply for running 12V devices such as air inflators, small power inverters and more
Multi-mode LED flashlight for convenience and emergency use (including strobe and SOS) provides up to 47 hours of light
Built-in safety features including short-circuit, reverse polarity, over charge protection and more.
Recharges from any powered USB port such as a laptop, 12V DC outlet (USB charger included) or household AC outlet (AC charge cube not included) in as little as 6 hours
Operating Temperature: -20°C to 60 °C (-4°F to 140°F)
Dimensions: 5-3/16" x 3-1/2" x 1-1/8" (13 x 8.89 x 2.85 cm)
Weight: 630 g (22 .2 oz.)
Makita's 3.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and a folding handle for easy transport. 3.0 HP with Big Bore Engineered Pump. The MAC5200 is powered by a 3.0 HP motor with a built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has a greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil-lubricated pump equipped with a large automotive-style filter for increased air intake and greater efficiency. The 5.2-gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers.
Performance (90 PSI): 6.5 CFM
Oil lubricated for cooler operation and reduced noise
High output cast iron pump delivers maximum performance and operational life
Big Bore cylinder and piston feature high output at lower RPM with reduced heat buildup, less noise and longer operational life
Low amperage draw reduces incidents of tripped breakers and voltage drops that cause premature motor failure
Easy view oil gauge and large pressure gauges for quick identification
Air pressure regulator enables easy adjustment of line pressure
Features 2 quick connect air hose fittings
Finned discharge tube promotes safe and efficient cooling
Lightweight wood boring drill. Ideal for building or repairing docks and bulkheads, fences, outbuildings, retaining walls and other structures where electricity is not available. Bits available: 1/2’’x12.5’’ – 3/4’’x18’’ – 7/8’’x18’’ – 1’’x18’’.
TrakFast – TF1200
The TrakFast Automatic Fastening System fastens all types of track, from standard track to hat channel, deep leg, Z, and J channel. The increased speed and productivity of TrakFast allows the contractor to bid more competitively, complete the job sooner and move on to the next job.
Org Case. W/ 3 Batteries.
The Milwaukee 0719 Cordless LITHIUM-ION M28 Sawzall Reciprocating Saw uses a high-powered Milwaukee-built motor to deliver faster cutting and performance. Powering the 0719 is the revolutionary 28 Volt LITHIUM-ION battery pack, exclusively from Milwaukee. The 28 Volt battery pack delivers twice the run-time as most 18V products, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge-cutting capabilities. This Sawzall saw has a 1-1/8 in. stroke length that delivers speed. The variable speed trigger delivers two levels of speed range: 0-2000 spm for metal cutting and other hard materials and 0-3000 spm for cutting in wood and other materials encountered. The gear-protecting clutch protects the tool against impact, delivering on the legendary Sawzall durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The QUIK-LOK™ blade clamp makes changing blades a snap. A comfortable non-slip soft grip handle provides a better gripping surface and reduces vibration and operator fatigue.
A robust 15A, 4700 RPMs powers through up to 3” for a straight cut and 2” at a 45º bevel. It offers you a 25” X 17” saw table surface for stability. And for extra safety and convenience, there’s an oversized on/off switch. It’s the saw table with power and incredible home workshop possibilities.
Mastercraft 15A Table Saw features a heavy-duty steel stand that is lightweight yet strong.
Features locking rip fence for accuracy with rip cuts, blade bevels 0-45°, 15A, 4700 RPM, and 10" blade
Also features a large ON/OFF switch for easy accessibility
Not Dado compatible